BackToCAD Technologies LLC |  Artificial Intelligence and Software Developing  |  Clearwater, USA; Stuttgart, Germany |  Kazmierczak®  Company

Using named views

 

As you work on a drawing, you may find that you frequently switch among different

portions of it. For example, if you are drawing the floor plan of a house, you may

zoom in to particular rooms of the house and then zoom out to display the entire

house. Although you can repeat the Pan and Zoom commands to do this, it is much

easier to save various views of the drawing as named views. You can then quickly

switch among these views. You can save and later restore named views using either

the View command or the Views element in the CAD.direct 2019 Explorer.

 

Displaying views in the CAD.direct 2019 Explorer

Do one of the following to choose Explore Views:

 

• On the ribbon, choose Tools > Views (in Explorer).

• Choose Tools > Explore Views.

• On the Explorer toolbar, click the Explore Views tool.

• Type expviews and then press Enter.

For example, you can create a separate user coordinate system (UCS) for each side of a building. Then, by switching to the UCS for the east side of the building, you can draw the windows on that side by specifying only their x- and y-coordinates.

 

You can create and then switch between various user coordinate systems by selecting Coordinate Systems in the CAD.direct 2019 Explorer.

Displaying coordinate system information in CAD.direct 2019 ExplorerTo display the Coordinate Systems element

 

Do one of the following to choose Explore Coordinate Systems:

• On the ribbon, choose Tools > Coordinate Systems (in Explorer).

• On the menu, choose Tools > CAD.direct 2019 Explorer > Explore Coordinate Systems.

• Choose Tools > User Coordinate Systems > Explore Coordinate Systems.

• On the Explorer toolbar, click the Explore Coordinate Systems tool.

• Type expucs and then press Enter.

 

Saving and naming views

You can save the view displayed in the current window as a named view. After you save a named view, you can restore that view in the current window at any time.

 

Restoring named views

After you save one or more named views, you can restore any of those views in the current window using either the View command or the CAD.direct

Drafter Explorer.

 

Changing named view properties

Once you create a named view you can modify its properties, such as the target direction and twist angle. This gives you access to many of the view settings after a view has been defined. Some properties are available directly in CAD.direct 2019 Explorer, while others are available in the Views Manager.

© Copyright 2019 Expert Robotics Inc. USA . All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. CAD.direct 2019 is a trademark of Expert Robotics Inc. Print2CAD and CAD2Print are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press, or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.